Reshafting is a solution to keep your golf irons in excellent shape and functioning properly. There are a few circumstances that may lead you to consider reshafting your irons.
Perhaps you broke a club, or you just may feel that the shaft is not effective any longer. Whatever the reason, you’ll want to have an idea of how much it will cost to reshaft irons.
This article will answer that question, based on current pricing, as well as provide other alternatives, so you can make an informed decision based on your specific needs.
Reshafting a golf iron can vary in price from $41 to $87 per iron. For a typical set of seven irons, this means a total cost of $287 to $609. Price can vary depending on the shaft you choose, labor charges, and where you have your irons reshafted.
When considering the cost of reshafting golf irons there are some specific factors to take into consideration besides just price.
It’s important to understand if reshafting is the best option or if it makes more sense to buy new irons. Deciding to extend your clubs (and the cost of doing so) is also a factor.
Understanding the pros and cons of reshafting from steel to graphite is also important to know, as well as determining what the best options are for new golf iron shafts.
In this article, we’ll cover the following topics:
- Cost Breakdown of Reshafting Irons
- Different Types of Golf Repair Shops
- Golf Club Reshafting Process
- Reshafting vs. Buying New Irons
- Cost to Extend Golf Clubs
- Reshafting from Steel to Graphite
- Best New Shafts for Irons
- Finding a Golf Repair Shop Near You
To start, we put together an accurate picture of what it costs to reshaft irons. We contacted retailers ranging from large chain retailers to small, independent shops to collect data to verify and break down costs.
Cost Breakdown of Reshafting Irons
There are numerous factors that go into the cost of reshafting irons. The process involves replacing the shaft, either with a steel or graphite shaft. You’ll also need to replace the grips, as it will likely be impossible to re-use an old grip on a reshafted iron.
Additional pricing factors include labor, which involves the disassembly and reassembly of the irons, in some cases the model of the iron, and where you take them to be reshafted.
Traditionally, a complete set of clubs would incorporate a 3, 4, 5, 6, 7, 8, and 9 iron. Although some golfers have evolved their use of irons and may replace the 3 and 4 irons with hybrid clubs, for the purposes of this article, we’ll consider seven to be the typical number of golf irons in a set.
In gathering this data, our research team contacted 25 golf shops across the country to obtain estimates for reshafting golf irons. These shops ranged from small and large retailers to independent shops, each of which offered varying pricing options, a summation of which can be seen in the table below.
As can be seen from the chart, there is a range in labor costs for reshafting a golf iron. If you were to take your irons to a small retailer, the average total labor cost would be $23. If you were to reshaft seven irons, you could expect to pay around $161 in labor. At an average of $27 per club, the labor costs at a large retailer would set you back roughly $189 for all seven irons. And an independent shop would cost $29 per iron on average or $203 for the entire set of golf irons.
When pricing out the cost of reshafting irons, you’ll also need to take into consideration the price of the shaft(s) and grips themselves. From our research, we found that there is a broad range of pricing options. Shafts will usually cost $15-$55 per club, and grips come in at $3-$13 per club. For a complete set of irons, you could expect to pay $105-$385 for shafts and $21-$91 for the grips. Nicer, high-quality shafts/grips will result in higher costs.
Taken together with our findings for the cost of labor, we can begin to get an accurate picture of the cost of reshafting a set of irons. A small retailer, for example, with labor being $161 for a set of seven irons, would cost approximately $287-$637. Taking your irons to a large retailer would run in the range of $315-$665. Finally, having golf irons reshafted, inclusive of the shaft, grip, and labor at an independent shop would set you back $329-$679.
The price that you can expect to pay for the shaft itself will vary depending on the brand and material type. For instance, if you’re switching from steel to graphite, this can significantly add to the cost.
Which Type of Repair Shop Should I Choose?
Every retailer wants your business, but what shop is best for your needs?
Our research has shown that there’s a difference in price between large national chain stores and small retailers or independent shops.
Large retailers such as Dick’s Sporting Goods or The Golf Mart can afford to offer services at lower price points since they have the luxury of corporate backing. Small retailers may maintain golf as a smaller subset of their overall business. If cost is the primary consideration, a store like one of these will probably fit your iron reshafting needs.
Independent shops may be more expensive, but often provide more expertise and better customer service. Independent shops will also likely be the place where you’ll develop more personalized relationships over time, as they are most often locally owned and operated. What these shops lack in cost competitiveness, make up for in personalized service. If a more bespoke experience is more what you’re after rather than cost savings, a local, independent shop may be the best choice for you.
Of course, another factor is simply real estate. Depending on where you live, the cost of doing business can often be dictated by local commercial leases. So, part of the built-in cost of doing business at an independent store in California will certainly be different than a small retailer in Tennessee.
Regardless of which shop you choose, be sure to read reviews for the business so you know you’ll get good service.
Golf Club Reshafting Process
As can be seen in the video, the actual process of reshafting an iron is quite involved and labor-intensive, hence the justification in cost.
First, the existing shaft must be removed from the iron, which involves placing the iron in a lock and heating the hosel.
Next, the tip of the shaft needs to be measured and trimmed.
Then the tip must be roughened and dipped in epoxy, and the new shaft inserted into the hosel.
The next step is to tap the end of the shaft to secure the tip against the bottom of the hosel bore. Then the iron is left until the epoxy has cured.
The final step involves installing the grips on the newly reshafted iron.
Should I Reshaft My Irons or Buy New?
You may wonder if it’s more practical (and cost-efficient) to simply buy a brand-new set of golf irons rather than reshafting your current ones. It’s a valid consideration.
The first step is to consider the cost for both options. Obtain a few estimates from different retailers as to what the cost of reshafting your irons would be. Price out what a set of new irons would run as well. If the cost to reshaft is similar to buying new clubs, then it may be a wiser choice to simply buy a new set.
Referencing our research, the total cost for reshafting irons inclusive of labor would run anywhere between $287 on the low end and $609 on the high end.
If you wanted to purchase a new set of irons, there is also a broad range of price options. On the lower end, a set may cost approximately $600. On the high end, it could run you as much as $1,200.
With the total cost of reshafting a set of irons ranging from $287-$609, there can be legitimate consideration given to the option of buying new over reshafting. Keep in mind that the shaft is the costliest part of a club, and irons are typically the most expensive clubs in a set.
Given these alternatives, if you’re weighing your options between buying new or reshafting an entire set of irons, there will be additional factors to consider such as the brand and your skill level, which will influence the cost.
If you’re considering buying new, another option is to consider trading in your current set of clubs. This may help you make your decision, as trading in your existing set could help offset the cost of purchasing new.
Ultimately, if it’s going to cost you very nearly as much to reshaft your current set as it would be to buy a new set of irons, it may be worth buying new.
How Much Does It Cost to Extend Golf Clubs?
Many players find that their golf game evolves over time, often necessitating adjustments to both how they play and the equipment they use. Most golfers will attempt to adjust their equipment, trying an assortment of irons of varying lengths before settling on the perfect combination.
One problem with this approach is that it can be expensive. Another common reason players consider using longer shafts is the belief that it will increase distance. Fortunately, you can extend your existing shafts to allow you to experiment with different lengths before spending money on an entirely new set of clubs. It’s also useful in the event you purchase a set of used clubs or perhaps receive clubs as a gift but they’re not quite the right size.
As far as the cost, extending the shaft of golf irons typically will cost between 6 and 7 dollars per club. It’s not an especially expensive procedure, but one that you’ll need to take into consideration when reshafting irons. For a set of 7 irons, the cost of extending the clubs would total between $42-$49 dollars.
Reshafting Irons from Steel to Graphite
Another reason for reshafting irons is if a player wants to switch from steel to graphite. This could be a consideration if an individual suffers from hand, arm, or shoulder issues or pain.
Graphite shafts are:
- Lighter
- Easier to swing
- More expensive
Graphite shafts are lighter than steel shafts, so they’re easier to swing than heavier steel shafts. Another benefit of this is that in the event of a mishit, vibrations on graphite shafts are more muffled, and are less painful.
Still another reason for switching to graphite shafts is if you’ve noticed your swing speed decrease and if you’re not carrying your irons as long as you used to. Graphite will improve both swing speed and distance, but you’ll also need to consider fit.
Any of these reasons would justify switching from steel to graphite shafts. So, the question becomes what is the cost of reshafting irons from steel to graphite?
It will be more expensive to reshaft your irons with graphite instead of steel. Pricing will likely cost in the range of $100-$160 for each shaft. Of course, the cost will increase if you replace all your irons. One option if reshafting from steel to graphite is to only have one or two clubs reshafted at a time.
Best New Shafts for Irons
Many golfers believe that the shaft is the most important part of the iron.
Choosing the best iron shaft can be a challenge, however, as there is a multitude of options available as well as fitting considerations. To that end, we’ve included some recommendations for the best options for new golf iron shafts currently on the market.
1. Project X Rifle 6.0 (Steel)
One of the best steel iron shafts is the Project X Rifle 6.0.
These shafts utilize technologically advanced features that essentially flattens the ball flight and achieve greater distances. These shafts are ideal for golfers with powerful, high-speed swings and want control.
This set of (eight) shafts is priced in the range of $200.
2. True Temper Dynamic Gold AMT X100 (Steel)
The True Temper Dynamic Gold AMT X100 is another solid choice for iron shafts.
These shafts are slightly heavier, which provides more control. The true Temper brand is known for manufacturing quality shafts and is used by some of the best golfers in the world. Golfers with high swing speeds tend to need a heavier golf shaft.
A set of eight shafts will cost about $150.
3. UST Mamiya Recoil 80 (Graphite)
For golfers looking for a good combination of distance, feel, and forgiveness, a graphite shaft is a good choice.
One of the best available is the UST Mamiya Recoil 80 Graphite. This shaft is mid-weight and would be suitable for a wide variety of golfers. This shaft provides a great trajectory and will have you feeling like the ball is bouncing off the shaft due to the recoil technology.
This brand of graphite shafts will range in price from $338-$377.
Recommended Golf Grips Brands
If you’re reshafting your irons, you’ll also need to choose some new grips to install.
Here’s a quick list of brands we recommend:
Reshaft Irons Near Me
If you’re looking for quality options for reshafting your golf irons, there are likely to be many alternatives near you. We’ve identified some of the best choices. Simply click the button to search for golf shops near you that can provide quality iron reshafting services.
Summary
Reshafting golf irons can help improve your golf game in many ways. For any golfer, it will be important to know what the cost of reshafting golf irons will be to make an informed decision as to what their best course of action will be.
For some, it may be to switch from steel to graphite. Others may need to extend their iron shafts. Still, other players may opt for an entirely new set of iron shafts.
Whether you’ve evolved in skill-level and your current iron shafts are not as effective, or you simply need to repair some damaged irons, reshafting irons can provide many additional years of enjoyment to your game.
